Printable batteries

For a long time, batteries were bulky and heavy. Now, a new cutting-edge battery is revolutionizing the field. It is thinner than a millimeter, lighter than a gram, and can be produced cost-effectively through a printing process.

Printable battery weigh less than a gram, is less than a millimeter thick and can be produced cost-effectively on a large scale. The battery contains no mercury and is in this respect environmentally friendly. Its voltage is 1.5 V, which lies within the normal range. By placing several batteries in series, voltages of 3 V, 4.5 V and 6 V can also be achieved.

The new type of battery is composed of different layers: a zinc anode and a manganese cathode, among others. Zinc and manganese react with one another and produce electricity. However, the anode and the cathode layer dissipate gradually during this chemical process. Therefore, the battery is suitable for applications which have a limited life span or a limited power requirement, for instance greeting cards. The batteries are printed using a silk-screen printing method similar to that used for t-shirts and signs.

A kind of rubber lip presses the printing paste through a screen onto the substrate. A template covers the areas that are not to be printed on. Through this process it is possible to apply comparatively large quantities of printing paste, and the individual layers are slightly thicker than a hair. The researchers have already produced the batteries on a laboratory scale. At the end of this year, the first products could possibly be finished.

Tweet